Tire Shredder

STRUCTURAL FEATURES: The shredding chamber is closely mated with the left-hand drive. The power will be effectively transmitted to the cutter shaft. The cutter consists of blade and hook(s). The function of hooks is to catch tires. Anti-wear and corrosion proof hard alloy is built-up welded on the working face of the cutter. The shredding chamber is a combined structure and the cutter shaft adopts rolling bearings, which is convenient for both installation and maintenance. The cylinder sieve will repeatedly send those unqualified chips or shivers back to the shredding chamber, while whose qualified ones will be let out of the sieve. The transmission system adopts a NGW planetary hardened-gearspeed reducer, whichis compactly structured withfeatures of lower noise, higher efficiency and longer service life. The configuration of the shredder is structurally compact and practically collocated. It is easy and reliable for operation and convenient for both installation and maintenance.ModelSpecificationsLP-1500LP-1200ALP-800Cutter Quantity1522(18)16Rotating Speed of Cutter Shaft(r/min)1015(13)16Capacity(Kg/h)2000Kg/h2000Kg/h1000Kg/hFeeding Requirement Complete tires≤1200 and all kinds of tread slabs Complete tires≤900 and all kinds of tread slabsComplete tires≤750 and all kinds of tread slabs Tires≥75014 should be cut into ieces before feedina. Discharging(mm)Strips(1OOmm wide)St rips(50mm wide)or blocks(50×50mm)Strips(50mm wide)or blocks(50×50mm)Main Motor Power(KW)55×27545Speed ReducerHard Facing Gear ReducerOverall dimension(mm)4950×2000×30505960×2800×33904100×2100×2280Weight(Kg)23000145007000