Cracker

STRUCTURAL FEATURES: The roll is made of chilled cast iron of vanadium and titanium alloy. The surface is rigid and anti-wear. The internal cavity is processed to ensure a well-proportioned temperature on the roll face.Both the front roll and the back roll are fluted. The machine is equipped withan overload protection device to preventthe major componentsfrom beingdamageddue tooverloading. The machine is also equipped with an emergency device. When an emergent accident happens, just draw the pull-rod, andthe machine will stop immediately. It is safe and reliable. The transmission system may adopt either a NGW planetary hardened-gearspeed reducer or an inverted-Yspeed reducer, both of whichare compactly structured withfeatures of low noise, high efficiency and a long service life. Thebase of the machine is a complete framework or a combined framework of cast piece,which is convenient for installation. The turning of the cylinder sieve repeatedly will send back those unqualified bigger rubber chips for further cracking. ModelSpecificationsZKC-560AZKC-560BCP-560Working Diameter of F.Roll(mm)510510510Working Diameter of B.Roll(mm)560560560Working Length of F.&B.Rolls(mm)800800800Linear Speed of F.Roll(m/min)23.624.323.7Linear Speed Ratio of F.&B.Rolls11.5511.55 11.55Maximum Nip(mm)151515Material Going Through Nip(Kg/h)200020002000Main Motor Power(KW)9090/11090Speed ReducerlnvertedY Speed ReducerNGW Planetary Hardened-gear Speed Reducer Overall Dimension(mm)Length 54005430Height 23002330width 21002100Weight(Kg)1750020000